Super fine Thermocouple Peek Cable Types K

  CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion.

  Options:Various colors available upon request36 AWG – 3/0AWG options are available1000V available upon requestOptional ShieldAvailable in colors

    Conductor Material:All strands used in the manufacture of the conductors shall be soft annealed silver or nickel-coated copper conforming to ASTM B298 or ASTM B355.Shield/Briad:The shield material shall be either stainless steel, silver tin-coated or nickel-coated copperInsulation Material: Polyetheretherketone (PEEK) insulation material is suggested, and the primary and jacket insulation material shall be to MIL-P-46183.  

  Conductor Material:All strands used in the manufacture of the conductors shall be soft annealed silver or nickel-coated copper conforming to ASTM B298 or ASTM B355.Shield/Briad:The shield material shall be either stainless steel, silver tin-coated or nickel-coated copperInsulation MaterialPolyetheretherketone (PEEK) insulation material is suggested, and the primary and jacket insulation material shall be to MIL-P-46183.

PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties.  CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors. We provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers,  Types J, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1.We can also make PEEK insulated, heat-resistant wire Cable.

We provide high temperature Gold plated copper wire cable products. If you are interested in high temperature Gold plated copper Wire cable, please contact us and initiate a consultation for more information.

  CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

We provide high temperature Gold plated copper wire cable products. If you are interested in high temperature Gold plated copper Wire cable, please contact us and initiate a consultation for more information.

Options:1. Shielded pairs, triads, overall shield,  etc.2. Available with galvanized steel armor, aluminum interlocked armor or stainless steel overbraid3. Available in sizes 48 AWG through 1/0 AWG

We provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers,  TypesJ, K and T, with 0.12-mm and 2.65-mm conductors, respectively. We can also make products compliant with Class 1. We can also make PEEK insulated, heat-resistant wire Cable. K tpe:  1, 0.127 peek OD: 0.2mm Red, 2, 0.127 peek OD: 0.2mm Green 3,Flat Peek OD: 0.45*0.7mm ,

  CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

Tungsten Wire With Polyimide / Kapton Coating CITCABLE: Thin-Wall Polyimide Coating wire  We provideThin-Wall Polyimide Coating wire  sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel   plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.08 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.20 mm ± 0.01 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

  Military Specification Styles A range of  PTFE Insulated wires, designed, manufactured and fully released to meet the requirements of MIL-W-16878 (NEMA HP4) TELFON UL/CSA Approved Styles A range of TEFLON Insulated wires designed are manufactured and fully released to meet the requirements.

CITCABLE:Super fine  Polyimide / Kapton Coating Wire Cable     We provideSuper fine  Polyimide / Kapton Coating Wire Cable for sensor products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel  plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.05 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.10 mm ± 0.01 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

CITCABLE: Polyimide  Coating wire cable     We provideThin-Wall Polyimide Coating wire  sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel   plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.08 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.10 mm ± 0.01 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK/TPI/PEI ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

CITCABLE:Flat  Kapton Wire   We provideThin-Wall Polyimide Coating wire  sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel   plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.08 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.20 mm ± 0.01 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

CITCABLE: Polyimide Wire Kapton Cable    We provideThin-Wall Polyimide Coating wire  sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel   plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.08 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.10 mm ± 0.01 mm  to 30mm ± 0.8 mm    Coating Requirements: ·    Type: Polyimide / Kapton/PEEK/TPI/PEI ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

CITCABE: PAI CABLE 30KV CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion. Polyimide (PI) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. Polyimides generally demonstrate excellent thermal stability in high as well as low temperatures. Polyimides also exhibit broad chemical resistance and good dielectric properties. Polyimides are poor conductors of heat and are highly disinclined to burn; they are also radiation resistant. These properties and others have made polyimides widely used in industries including medical, aerospace, automotive, electronics, chemical, sensors, and more

CITCABLE:TPI Coating Cable    CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion. Polyimide (PI) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. PI , CITCABLE PI / TEFLON composite, is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure TEFLON. Polyimide maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction

TPX Insulator Wire Cable CITCABLE: FREE PFAS  Wire Cable  CITCABLE can custom manufacture No PFAS Alternatives  Flexible Cable and wire with a vast range of conductors and thermoplastic insulation to meet our customers’ specifications. We manufacture Flexible Cable and Flexible Wire in custom sizes as small as AWG 40--AWG1/0  In addition,  CITCABLE has the expertise and experience in employing the kinds of thin-wall cable jacketing and insulation that many applications require.

CITCABLE:Thin-Wall Polyimide S316L medical Wire    We provideTungsten wire with Polyimide / Kapton/PEEK/PI/ETFE/PTFE/TPX Coating sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: White Tungsten with a purity of ≥ 99.95% ·     Tungsten/S316L/S304 Diameter: 0.08 mm ± 0.001 mm ·   Polyimide / Kapton Diameter: 0.12 mm ± 0.01 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK/PI/ETFE/PTFE/TPX ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production   ·    Handling: Components must not be touched with latex glove

CITCABLE: Flat Polyimide Wire Cable Polyimide (TPI,KAPTION) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. TPI KAPTION composite is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure TPI KAPTION maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction. PI, KAPTION  is available in tubing and as a coating for over-the-wire ( insulated wire cable) applications.  For insulated wire,TPI  KAPTION provides a low-friction wire for easier deployment or insertion into tubing. With TPI KAPTION  wire, inside diameters offer low resistance to inserted devices or tools (pushability) while the outside remains bondable without etching. TPI KAPTION can also be produced in a layered composite construction with our conventional polyimide or with PI KAPTION. Composite layering polyimide and TPI KAPTION allows users to further tailor polyimide tubing or coating properties.

CITCABLE: Platinum Tungsten Polyimide coating for medical Wire Platinum Tungsten (Pt/W)   、   Platinum Iridium (Pt/Ir)   、  Platinum Nickel (Pt/Ni)       We provideTungsten wire with Polyimide / Kapton/PEEK/PI/ETFE/PTFE/TPX Coating sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: White Tungsten with a purity of ≥ 99.95% ·     Tungsten/S316L/S304 Diameter: 0.03 mm ± 0.001 mm ·   Polyimide / Kapton Diameter: 0.035 mm ± 0.001 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK/PI/ETFE/PTFE/TPX ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production   ·    Handling: Components must not be touched with latex glove

CITCABLE: Platinum Tungsten Polyimide coating for medical Wire Platinum Tungsten (Pt/W)   、   Platinum Iridium (Pt/Ir)   、  Platinum Nickel (Pt/Ni)       We provideTungsten wire with Polyimide / Kapton/PEEK/PI/ETFE/PTFE/TPX Coating sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: White Tungsten with a purity of ≥ 99.95% ·     Tungsten/S316L/S304 Diameter: 0.03 mm ± 0.001 mm ·   Polyimide / Kapton Diameter: 0.035 mm ± 0.001 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK/PI/ETFE/PTFE/TPX ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production   ·    Handling: Components must not be touched with latex glove

CITCABLE provides professional medical-grade sensor cables and coated wires. This series of medical wires primarily utilizes Platinum-Iridium (Pt/Ir), Platinum-Tungsten (Pt/W), and Platinum-Nickel (Pt/Ni) alloys as core conductors, which are then insulated with high-performance coatings such as Polyimide (Kapton), PEEK, ETFE, PTFE, or TPX.

CITCABLE: Flat TPI  KAPTION Cable Polyimide (TPI,KAPTION) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. TPI KAPTION composite is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure TPI KAPTION maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction. PI, KAPTION  is available in tubing and as a coating for over-the-wire ( insulated wire cable) applications.  For insulated wire,TPI  KAPTION provides a low-friction wire for easier deployment or insertion into tubing. With TPI KAPTION  wire, inside diameters offer low resistance to inserted devices or tools (pushability) while the outside remains bondable without etching. TPI KAPTION can also be produced in a layered composite construction with our conventional polyimide or with PI KAPTION. Composite layering polyimide and TPI KAPTION allows users to further tailor polyimide tubing or coating properties.

CITCABLE:  260°C Ultra thin PEEK Wire cable  and TPI Coated/TEFLON Coated/OTHERS Coateds K TYPE THERMOCOUPLE  36AWG 0.127 PEEK  OD:0.20MM TYPE KN ,GREEN K TYPE THERMOCOUPLE  36AWG 0.127 PEEK  OD:0.20MM TYPE KP ,RED   K TYPE THERMOCOUPLE 30AWG 0.25 OD:0.30MM TYPE KN ,GREENK TYPE THERMOCOUPLE 30AWG  0.25 OD:0.30MM TYPE KP ,REDK TYPE THERMOCOUPLE 30AWG 0.25 OD:0.41MM TYPE KN ,GREENK TYPE THERMOCOUPLE 30AWG  0.25 OD:0.41MM TYPE KP ,REDJ TYPE THERMOCOUPLE 30AWG 0.26 ,0.41MM   TYPE JN GREENJ TYPE THERMOCOUPLE 30AWG  0.26 ,0.41MM  TYPE JP RED,GARY,BLUE,WHITEK ,J,T, TYPE THERMOCOUPLE conductors 0.32MM, OD:0.55MM  , flat duplex insulated or  a pair individually PEEKK ,J,T, TYPE  THERMOCOUPLE conductors  0.65MM,  OD:0.90MM   , flat duplex insulated or  a pair individually PEEK   High Temperature Sensor Cable is primarily used in applications where accurate temperature measurement is crucial, such as in aerospace, automotive, industrial automation, and power generation. It is designed to withstand extreme heat while providing reliable data for temperature-sensitive equipment. Whether used for engine sensors, temperature probes, or industrial controllers, this cable ensures optimal performance in high-temperature environments, offering stability and precision even in the harshest conditions.   1/0AWG to #46 AWG sizes (OD:0.10--20.0mm) • Wall thickness ranging from  (0.03 mm - 2.81 mm)• 100%  spark tested during extrusion• Amorphous or crystalline PEEK Insulated Wire available• Round, stranded, square and rectangular profiles available• Various types of wire available, including silver and nickel-plated wire as well as custom wire types   Looking for a halogen-free, flame-retardant material with unbeatable radiation resistance and safe to operate up to 260°C,Look no further than PEEK. A core insulating material in many of our cables, PEEK is ideal for demanding environments like nuclear power reactors or vehicle exhaust sensors.

CITCABLE Fluoroelastomer Cable  We provide fluoroelastomer/ FKM/VITON/FRW cable ARX-9Cable wire cable products. If you are interested in fluoroelastomer fkm wire cable, please contact us and initiate a consultation for more information. 1. Engine Oil (ISO 1817. Oil No. 2)2. Engine Oil (IRM 902)3. Gasoline (Ref. Fuel C)4. Ethanol / Ref. Fuel C Mixture5. Diesel Fuel6. Battery Acid (Sp. Gr. ~ 1.26)7. Engine Coolant 50/508. E20

CITCABLE:  Kapton Insulated Coaxial Cable   Polyimide (TPI,KAPTION) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. TPI KAPTION composite is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure TPI KAPTION maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction. PI, KAPTION  is available in tubing and as a coating for over-the-wire ( insulated wire cable) applications.  For insulated wire,TPI  KAPTION provides a low-friction wire for easier deployment or insertion into tubing. With TPI KAPTION  wire, inside diameters offer low resistance to inserted devices or tools (pushability) while the outside remains bondable without etching. TPI KAPTION can also be produced in a layered composite construction with our conventional polyimide or with PI KAPTION. Composite layering polyimide and TPI KAPTION allows users to further tailor polyimide tubing or coating properties.

CITCABLE: Kapton Cable    CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion. Polyimide (PI) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. PI , CITCABLE PI / TEFLON composite, is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure TEFLON. Polyimide maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction

CITCABLE: High performance  Polyimide Cable    We provideThin-Wall Polyimide Coating wire  sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel   plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.08 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.10 mm ± 0.01 mm  to 30mm ± 0.8 mm    Coating Requirements: ·    Type: Polyimide / Kapton/PEEK/TPI/PEI ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

CITCABLE ：Irradiated cross-linked  fluoro-elastomer Cable   We provide fluoroelastomer、 FKM、VITON 、FRW cable ARX-9、 R9 Cable wire cable products. If you are interested in fluoroelastomer fkm wire cable, please contact us and initiate a consultation for more information. 1. Engine Oil (ISO 1817. Oil No. 2)2. Engine Oil (IRM 902)3. Gasoline (Ref. Fuel C)4. Ethanol / Ref. Fuel C Mixture5. Diesel Fuel6. Battery Acid (Sp. Gr. ~ 1.26)7. Engine Coolant 50/508. E20

CITCABLE: Kapton Wire   We provideThin-Wall Polyimide Coating wire  sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel   plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.08 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.20 mm ± 0.01 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

We provide high temperature pure silver sensor wire cable products. If you are interested in high temperature silver ntc sensor wire cable, please contact us and initiate a consultation for more information.

CITCABLE: Polyimide Coating wire      We provideThin-Wall Polyimide Coating wire  sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel   plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.08 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.10 mm ± 0.01 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK/TPI/PEI ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

CITCABLE: High Temperature PEEK TPI PTX Cable CITCable extrudes all types of PEEK,PEI,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as  miniature control cables. We provide fluid resistant atf oil and gas cable products. If you are interested in fluid resistant atf oil and gas cable, please contact us and initiate a consultation for more information.   Features 1, Excellent mechanical properties and chemical resistance.2, Outstanding and Excellent resistance at high temperature to engine fluids3, High tear and tensile strength damping characteristic.4, Hot Oil Resistant Thin-Wall 150 ℃ , 200℃  5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket6, High Temperature, High Performance

CITCABLE: High Temperature PEEK TPI,PI Cable CITCable extrudes all types of PEEK,PEI,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as  miniature control cables. We provide fluid resistant atf oil and gas cable products. If you are interested in fluid resistant atf oil and gas cable, please contact us and initiate a consultation for more information.   Features 1, Excellent mechanical properties and chemical resistance.2, Outstanding and Excellent resistance at high temperature to engine fluids3, High tear and tensile strength damping characteristic.4, Hot Oil Resistant Thin-Wall 150 ℃ , 200℃  5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket6, High Temperature, High Performance

CITCABLE: TPI Coating wire Cable     We provideThin-Wall Polyimide Coating wire  sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel   plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.08 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.10 mm ± 0.01 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK/TPI/PEI ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

CITCABLE: Flexible  Foam FEP wire Cable  Foam FEP  cables For  Canbus, Cat ,SPE Flexible Fluorpolymer Plenum (cat5,RG, Canbus,SPE and so on )   100ohm, 120ohm Foam FEP  twisted par data cables  with heat resistant up to 250° We can meet your industry specific requirements promptly as we are equipped with advanced in-house wire and cable manufacturing equipment.We assure on time product delivery, whilst meeting all product quality expectations.

CITCABLE:  PEEK/PI Insulated Coaxial WIRE Cable   Polyimide (TPI,KAPTION) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. TPI KAPTION composite is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure TPI KAPTION maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction. PI, KAPTION  is available in tubing and as a coating for over-the-wire ( insulated wire cable) applications.  For insulated wire,TPI  KAPTION provides a low-friction wire for easier deployment or insertion into tubing. With TPI KAPTION  wire, inside diameters offer low resistance to inserted devices or tools (pushability) while the outside remains bondable without etching. TPI KAPTION can also be produced in a layered composite construction with our conventional polyimide or with PI KAPTION. Composite layering polyimide and TPI KAPTION allows users to further tailor polyimide tubing or coating properties.

CITCABLE:  260°C Ultra thin PEEK, PFA, Wire cable  and TPI Coated/TEFLON Coated/OTHERS Coateds High Temperature Sensor Cable is primarily used in applications where accurate temperature measurement is crucial, such as in aerospace, automotive, industrial automation, and power generation. It is designed to withstand extreme heat while providing reliable data for temperature-sensitive equipment. Whether used for engine sensors, temperature probes, or industrial controllers, this cable ensures optimal performance in high-temperature environments, offering stability and precision even in the harshest conditions.   1/0AWG to #48 AWG sizes (OD:0.07--20.0mm) • Wall thickness ranging from  (0.02 mm - 2.81 mm)• 100%  spark tested during extrusion• Amorphous or crystalline PEEK/TPI/PFA Insulated Wire available• Round, stranded, square and rectangular profiles available• Various types of wire available, including silver and nickel-plated wire as well as custom wire types   Looking for a halogen-free, flame-retardant material with unbeatable radiation resistance and safe to operate up to 260°C,Look no further than PEEK. A core insulating material in many of our cables, PEEK is ideal for demanding environments like nuclear power reactors or vehicle exhaust sensors.

  CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

CITCABLE:  Foam FEP Canbus Cable/ Flexible  Foam FEP wire Cable  Foam FEP  cables For  Canbus, Cat ,SPE Flexible Fluorpolymer Plenum (cat5,RG, Canbus,SPE and so on )   100ohm, 120ohm Foam FEP  twisted par data cables  with heat resistant up to 250° We can meet your industry specific requirements promptly as we are equipped with advanced in-house wire and cable manufacturing equipment.We assure on time product delivery, whilst meeting all product quality expectations.

CITCABLE: Ultra-fine Kapton Wire/ Kapton Wire   We provideThin-Wall Polyimide Coating wire  sensor cable products. If you are interested in high temperature motor sensor  cable, please contact us and initiate a consultation for more information. Wire Specifications: ·    Material: Pure Silver, Nickel or Silver, Nickel   plated copper with a purity of ≥ 99.99% ·     Tungsten Diameter: 0.08 mm ± 0.005 mm ·   Polyimide / Kapton Diameter: 0.20 mm ± 0.01 mm   Coating Requirements: ·    Type: Polyimide / Kapton/PEEK ·    Solvent Residue: N-Methyl-2-Pyrrolidone (NMP) ≤ 0.1 wt% ·    Biocompatibility: USP Class VI ·      Cleanliness Requirements ·    Environment: Latex-free production

CITCABLE:  260°C Ultra thin PEEK Wire cable  and TPI Coated/TEFLON Coated/OTHERS Coateds Any alony or Silver and others Min 48AWG with PI and peek ... K TYPE THERMOCOUPLE  36AWG 0.127 PEEK  OD:0.20MM TYPE KN ,GREEN K TYPE THERMOCOUPLE  36AWG 0.127 PEEK  OD:0.20MM TYPE KP ,RED   K TYPE THERMOCOUPLE 30AWG 0.25 OD:0.30MM TYPE KN ,GREENK TYPE THERMOCOUPLE 30AWG  0.25 OD:0.30MM TYPE KP ,REDK TYPE THERMOCOUPLE 30AWG 0.25 OD:0.41MM TYPE KN ,GREENK TYPE THERMOCOUPLE 30AWG  0.25 OD:0.41MM TYPE KP ,REDJ TYPE THERMOCOUPLE 30AWG 0.26 ,0.41MM   TYPE JN GREENJ TYPE THERMOCOUPLE 30AWG  0.26 ,0.41MM  TYPE JP RED,GARY,BLUE,WHITEK ,J,T, TYPE THERMOCOUPLE conductors 0.32MM, OD:0.55MM  , flat duplex insulated or  a pair individually PEEKK ,J,T, TYPE  THERMOCOUPLE conductors  0.65MM,  OD:0.90MM   , flat duplex insulated or  a pair individually PEEK   High Temperature Sensor Cable is primarily used in applications where accurate temperature measurement is crucial, such as in aerospace, automotive, industrial automation, and power generation. It is designed to withstand extreme heat while providing reliable data for temperature-sensitive equipment. Whether used for engine sensors, temperature probes, or industrial controllers, this cable ensures optimal performance in high-temperature environments, offering stability and precision even in the harshest conditions.   1/0AWG to #46 AWG sizes (OD:0.10--20.0mm) • Wall thickness ranging from  (0.03 mm - 2.81 mm)• 100%  spark tested during extrusion• Amorphous or crystalline PEEK Insulated Wire available• Round, stranded, square and rectangular profiles available• Various types of wire available, including silver and nickel-plated wire as well as custom wire types   Looking for a halogen-free, flame-retardant material with unbeatable radiation resistance and safe to operate up to 260°C,Look no further than PEEK. A core insulating material in many of our cables, PEEK is ideal for demanding environments like nuclear power reactors or vehicle exhaust sensors.

TPX Insulator Wire Cable CITCABLE: PFAS FREE  CABLE / FREE PFAS  Wire Cable  CITCABLE can custom manufacture PFAS FREE  CABLE   / NoPFAS Alternatives  Flexible Cable and wire with a vast range of conductors and thermoplastic insulation to meet our customers’ specifications. We manufacture Flexible Cable and Flexible Wire in custom sizes as small as AWG 40--AWG1/0  In addition,  CITCABLE has the expertise and experience in employing the kinds of thin-wall cable jacketing and insulation that many applications require.

CITCABLE have optimize 100% PEEK coating process to stabilize PEEK during extreme temperature fluctuations. This stabilization allows the optical fiber to retain PEEK’s strain transfer and optical properties while being free of compression-induced attenuation normally seen during temperature changes. CITCABLE PEEK reinforced optical fiber wire is ruggedized to protect against abrasion and physical trauma to reduce failures and extend the life of the fiber

CITCABLE: High Temperature PEEK TPI TPX Cable CITCable extrudes all types of PEEK,PEI,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as  miniature control cables. We provide fluid resistant atf oil and gas cable products. If you are interested in fluid resistant atf oil and gas cable, please contact us and initiate a consultation for more information.   Features 1, Excellent mechanical properties and chemical resistance.2, Outstanding and Excellent resistance at high temperature to engine fluids3, High tear and tensile strength damping characteristic.4, Hot Oil Resistant Thin-Wall 150 ℃ , 200℃  5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket6, High Temperature, High Performance

CITCABLE provides professional medical-grade sensor cables Platinum Iridium plated gold Wire ,and coated gold wires. This series of medical wires primarily utilizes Platinum-Iridium (Pt/Ir), Platinum-Tungsten (Pt/W), and Platinum-Nickel (Pt/Ni) alloys as core conductors, which are then insulated with high-performance coatings such as Polyimide (Kapton), PEEK, ETFE, PTFE, or TPX.

PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties.  CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors.

HFI 260 cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion.

CITCABLE: Flexible power cables    We provide fluid resistant oil flexible Flexible power cables   products. If you are interested in fluid resistant atf oil flexible xlfe cable, please contact us and initiate a consultation for more information Flexible power cables are perfectly suited to systems where high currents and flexibility are paramount: armoured vehicles, tanks, radar systems, public transport, cars, wind power, robots and ships. Flexible power cables can greatly ease mechanical installation when the FLAT available space is very limited. CITCABLE has selected in-house flexible conductors and resistant insulation materials adapted to high current carrying capacities.  flexible power cables can be terminated with cable lugs or power connectors. Halogen free versions for more security are available. 

  CITCABLE can insulate many different wire types with PEEK including: solid copper,silver-and-nickel-plated, stranded, square and rectangle profile wires, stainless stee,aluminum,and other custom types.

CITCABLE: Multi-core PEEK Cable 12 core AND 16 core 22AWG CITCable extrudes all types of PEEK,PEI,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as  miniature control cables. We provide fluid resistant atf oil and gas cable products. If you are interested in fluid resistant atf oil and gas cable, please contact us and initiate a consultation for more information.   Features 1, Excellent mechanical properties and chemical resistance.2, Outstanding and Excellent resistance at high temperature to engine fluids3, High tear and tensile strength damping characteristic.4, Hot Oil Resistant Thin-Wall 150 ℃ , 200℃  5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket6, High Temperature, High Performance

CITCABLE: Foam FEP 100 OHM Twisted Pair, #26 AWG   Foam FEP  cables For  Canbus, Cat ,SPE Flexible Fluorpolymer Plenum (cat5,RG, Canbus,SPE and so on )   100ohm, 120ohm Foam FEP  twisted par data cables  with heat resistant up to 250° We can meet your industry specific requirements promptly as we are equipped with advanced in-house wire and cable manufacturing equipment.We assure on time product delivery, whilst meeting all product quality expectations.

CITCABLE:  260°C  36AWG 30AWG Pure Silver PEEK wire  and TPI Coated/TEFLON Coated/OTHERS Coateds Any alony or Silver and others Min 48AWG with PI and peek ...   High Temperature Sensor Cable is primarily used in applications where accurate temperature measurement is crucial, such as in aerospace, automotive, industrial automation, and power generation. It is designed to withstand extreme heat while providing reliable data for temperature-sensitive equipment. Whether used for engine sensors, temperature probes, or industrial controllers, this cable ensures optimal performance in high-temperature environments, offering stability and precision even in the harshest conditions.   1/0AWG to #46 AWG sizes (OD:0.10--20.0mm) • Wall thickness ranging from  (0.03 mm - 2.81 mm)• 100%  spark tested during extrusion• Amorphous or crystalline PEEK Insulated Wire available• Round, stranded, square and rectangular profiles available• Various types of wire available, including silver and nickel-plated wire as well as custom wire types   Looking for a halogen-free, flame-retardant material with unbeatable radiation resistance and safe to operate up to 260°C,Look no further than PEEK. A core insulating material in many of our cables, PEEK is ideal for demanding environments like nuclear power reactors or vehicle exhaust sensors.

 CITCABLE： UL CL2P 18AWG4C CABLE rated 105°C   UL CL3P 18AWG4C CABLE    rated 105°C                     UL  CMP 18AWG4C CABLE  rated 150°C                   （NO-UL）  CL2P,CL3P CMP 18AWG4C CABLE  rated 200°C 250°C   This certificate confirms thatrepresentative samples of POWER-LIMITED CIRCUIT CABLEUSL: Power-Limited Circuit Cable, Types CL2P and CL3P,rated 105°C Have been investigated by UL in accordance with theStandard(s) indicated on this Certificate Standard(s) for Safety:Additional Information: UL 13 Power-Limited Circuit Cables    We can meet your industry specific requirements promptly as we are equipped with advanced in-house wire and cable manufacturing equipment. We assure on time product delivery, whilst meeting all product quality expectations.

 CITCABLE：UL CL3P 22AWG2C CABLE FOR Lighting  UL CL2P 18AWG4C CABLE rated 105°C    UL CL3P 18AWG4C CABLE    rated 105°C   （NO-UL）  CL2P,CL3P CMP 18AWG4C CABLE  rated 200°C 250°C ,CMP 18AWG4C CABLE  rated 150°C    This certificate confirms thatrepresentative samples of POWER-LIMITED CIRCUIT CABLEUSL: Power-Limited Circuit Cable, Types CL2P and CL3P,rated 105°C Have been investigated by UL in accordance with theStandard(s) indicated on this Certificate Standard(s) for Safety:Additional Information: UL 13 Power-Limited Circuit Cables    We can meet your industry specific requirements promptly as we are equipped with advanced in-house wire and cable manufacturing equipment. We assure on time product delivery, whilst meeting all product quality expectations.

  PAEK (polyaryletherketone) WIRE CABLE is a family of high-performance polyketones tailored to fill cost and performance gaps between PEEK and other high-performance polymers. For example, ductility and toughness can be significantly improved versus comparable grades of PEEK, delivering 20% higher tensile elongation at yield and double tensile elongation at break values.

CITCABLE:Ultra-Fine Thermocouple wire  Types J, K and T  High Temperature PEEK TPI TPX Cable CITCable extrudes all types of PEEK,PEI,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as  miniature control cables. Material Types  T  Copper-Constantan Types  J AND K   Chromel-Alumel Conductor Size AWG 28 ~ 48 AWG 28 ~ 48 Insulator PEEK, PI, PFA, etc.  PEEK, PI, PFA, etc.  JIS C 1602 Tolerance Class 1 Equivalent (within ±0.5°C) Class 1 Equivalent (within ±1.5°C)    CITCABLE provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers,  TypesJ, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1. We can also make PEEK insulated, heat-resistant wire Cable.

CITCABLE:Ultra-Fine PEEK Insulated Wire Features - Lightweight wire with superior heat durability, radiation resistance, mechanical properties and chemical resistance  Use - Applications in harsh environments such as nuclear power plants and spaceflight applications  Comparison of Basic Characteristics between PEEK and Fluoropolymer (Teflon)                                                                                                   PEEK                 Fluoropolymer (Teflon) Specific Gravity - 1.3 2.12～2.20 Melting Point ℃ 343 255～327 Glass Transition Point ℃ 143 75～130 Continuous Operating Temperature ℃ 260 200～260 Thermal Conductivity W/m℃ 0.29 0.19～0.23 Volume Resistivity Ωcm 10¹⁶ 10¹⁸ Dielectric Constant - 3.2 2.1 Growth ％ 40 200～400 Tensile Strength MPa 100 14～34 Compression Strength MPa 120 12～17 Flexural Modulus GPa 4.2 0.55～0.82 Tensile Modulus GPa 3.7 0.34～0.55 Wear Resistance - Excellent Good Reset Switch Resistance - Excellent Good Radiation Resistance RAD 10⁹ 10⁴ UV Resistance - Excellent Excellent Chemical Resistance - Good * Excellent       High Temperature PEEK ,PI ,TPX Cable CITCable extrudes all types of PEEK,PEI,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others,    CITCABLE provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers,  TypesJ, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1. We can also make PEEK insulated, heat-resistant wire Cable.

  We provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers,  TypesJ, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1. We can also make PEEK insulated, heat-resistant wire Cable.

CITCABLE provides professional Tungsten plated Gold Wire      Stranded tungsten wires element features high melting point and high corrosion resistance, mainly applied for aluminizing kinescope, chromo scope, mirrors, plastics and heater elements for decoration articles, Stranded tungsten wire is applied for making heater elements and other heater components in semiconductor and vacuum devices. 49/0.02MM  type is one of our standard products; if you are interested in it or you have any question, please let us know the details of your requirements and the type number, and please see the Terms & Conditions before placing formal orders on us. Features: Made from pure tungsten with a purity level of over 99.5% Available in various sizes 0.015---0.4MM or others Suitable for aviation, electronics, industrial, medical, and chemical applications Complies with GB and ASTM standards Benefits: High precision wire for accurate metal evaporation Durable and reliable Ensures consistent performance in different industries Meets international quality standards Introducing the 99.95% pure tungsten filament/tungsten wire from LUOYANG COMBAT TUNGSTEN & MOLYBDENUM MATERIAL CO., LTD. This high-quality tungsten wire is designed to meet the reading habits of English-speaking natives, providing exceptional performance and reliability. Tungsten Wire Physical Properties Purity: 99.9% Density: 19.2 Surface: black&white Pure tungsten size: Dia(0.01-3.0)mm Pure tungsten twisted wire: number of strands - 1-10 (strands) Difference between 2 feet(mm): Big heater element - ± 2mm; Small heater element - ± 1mm Inside diameter tolerance: ± 0.3mm Specifications (mm)   Our 99.95% pure tungsten filament/tungsten wire is available in various specifications to suit your specific needs: This series of high-performance wires primarily utilizes bare, tinned, silver-plated, or nickel-plated copper, pure silver, and specialized alloys as core conductors, which are then insulated with high-performance coatings such as specialized Polyimide (Kapton/PI).  CITCable extrudes all types of  PEEK,PEI, Polyimide ,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as miniature control cables. Radiation resistance combined with high or low temperatures, extreme mechanical stress, and miniaturisation, in standard or inert atmosphere。 We provide fluid resistant atf oil and gas cable products. If you are interested in fluid resistant atf oil and gas cable, please contact us and initiate a consultation for more information.   Features   1, Excellent mechanical properties and chemical resistance.2, Outstanding and Excellent resistance at high temperature to engine fluids3, High tear and tensile strength damping characteristic.4, Hot Oil Resistant Thin-Wall 200 ℃ , 240℃  5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket6, High Temperature, High Performance

  PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties.  CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors.

  CITCables are designed for extremely low temperature environments and manufactured who can produce a broad range of extreme temperature Cryogenic Cables for use in the most challenging of environments. With clients from the Oil and Gas to the Steel and Nuclear industries, we are confident we have a cable to suit your requirements.

CITCABLE PAEK insulated wire is available by custom order and in crystalline and amorphous; we can extrude this material in round, square. We can also provide PAEK insulated wire in stranded and other wire. PAEK wire sized 38AWG --1/0AWG PAEK lead wire PAEK insulation wire for Motor