Low noise coaxial HFI 260 cable

  CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion.

  Options:Various colors available upon request36 AWG – 3/0AWG options are available1000V available upon requestOptional ShieldAvailable in colors

    Conductor Material:All strands used in the manufacture of the conductors shall be soft annealed silver or nickel-coated copper conforming to ASTM B298 or ASTM B355.Shield/Briad:The shield material shall be either stainless steel, silver tin-coated or nickel-coated copperInsulation Material: Polyetheretherketone (PEEK) insulation material is suggested, and the primary and jacket insulation material shall be to MIL-P-46183.  

  Conductor Material:All strands used in the manufacture of the conductors shall be soft annealed silver or nickel-coated copper conforming to ASTM B298 or ASTM B355.Shield/Briad:The shield material shall be either stainless steel, silver tin-coated or nickel-coated copperInsulation MaterialPolyetheretherketone (PEEK) insulation material is suggested, and the primary and jacket insulation material shall be to MIL-P-46183.

PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties.  CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors. We provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers,  Types J, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1.We can also make PEEK insulated, heat-resistant wire Cable.

We provide high temperature Gold plated copper wire cable products. If you are interested in high temperature Gold plated copper Wire cable, please contact us and initiate a consultation for more information.

  CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

  CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

We provide high temperature pure silver sensor wire cable products. If you are interested in high temperature silver ntc sensor wire cable, please contact us and initiate a consultation for more information.

CITCABLE have optimize 100% PEEK coating process to stabilize PEEK during extreme temperature fluctuations. This stabilization allows the optical fiber to retain PEEK’s strain transfer and optical properties while being free of compression-induced attenuation normally seen during temperature changes. CITCABLE PEEK reinforced optical fiber wire is ruggedized to protect against abrasion and physical trauma to reduce failures and extend the life of the fiber

PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties.  CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors.

HFI 260 cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion.

  CITCABLE can insulate many different wire types with PEEK including: solid copper,silver-and-nickel-plated, stranded, square and rectangle profile wires, stainless stee,aluminum,and other custom types.

  PAEK (polyaryletherketone) WIRE CABLE is a family of high-performance polyketones tailored to fill cost and performance gaps between PEEK and other high-performance polymers. For example, ductility and toughness can be significantly improved versus comparable grades of PEEK, delivering 20% higher tensile elongation at yield and double tensile elongation at break values.

  We provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers,  TypesJ, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1. We can also make PEEK insulated, heat-resistant wire Cable.

  PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties.  CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors.

  CITCables are designed for extremely low temperature environments and manufactured who can produce a broad range of extreme temperature Cryogenic Cables for use in the most challenging of environments. With clients from the Oil and Gas to the Steel and Nuclear industries, we are confident we have a cable to suit your requirements.

CITCABLE PAEK insulated wire is available by custom order and in crystalline and amorphous; we can extrude this material in round, square. We can also provide PAEK insulated wire in stranded and other wire. PAEK wire sized 38AWG --1/0AWG PAEK lead wire PAEK insulation wire for Motor