magnet wire

• How to remove paint for magnet wire enameled wire

  Apr 08, 2025

    As a representative product of magnet wire, copper-clad aluminum wire is a bimetallic composite wire that is combined with copper layers on the aluminum core. Reasonable use of the properties of different metals, so as to achieve the characteristics of reducing production costs and facilitating engineering construction.Copper-clad aluminum wire is used in the cable television industry, and copper-clad aluminum wire has become the standard material for coaxial cables in the United States. Because the high-frequency signal transmission runs on the outer layer of the wire, the copper-clad aluminum wire can replace the copper wire of the same specification. In low-frequency applications, the load capacity of copper-clad aluminum is 65% of that of copper wires of the same specification. Because of its light weight, it is softer than copper when large wire sizes are required. Copper-clad aluminum is used for battery cables, welding cables, Building cables and electromagnetic wires are also the best wire materials.Compared with pure copper wire, copper-clad aluminum wire has the advantages of good electrical conductivity and light weight, which is economical, and has good flexibility during construction and is easy to operate. The length ratio of the same wire weight is 2.45:1, so buying 1 ton of copper-clad aluminum wire is equivalent to buying 2.45 tons of pure copper wire, which has the advantage of saving costs.Compared with pure aluminum wire, copper-clad aluminum wire has high electrical conductivity, and also increases tensile strength and elongation. The solderability like copper wire greatly increases the mechanical properties and applicability of the product.How to remove paint for magnet wire enameled wire, we can roughly divide it into the following three methods according to different conditions, equipment and needs.1. For ordinary thin wires, it can be directly tinned when placed on a soldering iron at 400 degrees Celsius. For thick wires, we do not recommend the method of fire roasting, which will make the magnet wire oxidize and affect its properties, and even if it is reluctantly completed in time, it will be found that there will be some pores on the surface of the tin.2. We can also apply rosin on the broken end of the enameled wire, and put the section into the soldering iron to melt tin. The section has no paint, so it will be tinned quickly, and the surrounding area will also increase with the temperature without adhesion. Remove the paint and tin, we just need to control the temperature.3. Here we recommend the third type of paint. Qualified paints do not damage or corrode the metal. They can remove the paint on the surface of the electromagnetic wire. There are bad consequences or residues on the wire surface. The core wire has excellent weldability after removing the paint. Now many industrial manufacturing sites use this method for batch processing. Now it has replaced the old method of scraping and burning with a knife, and the cost is leaping.  

  Hot Tags : magnet wire copper-clad aluminum wire

  Read More
• What is the difference between magnet wire and enameled wire?

  Mar 28, 2025

    Enameled wire is a category of magnet wire, usually refers to the insulated wire used to manufacture coils or windings in electrical products. Also called winding wire.Magnet wire must meet a variety of usage and manufacturing process requirements. The former includes its shape, specifications, can work at high temperature for short and long-term, and withstand strong vibration and centrifugal force at high speed in certain occasions, withstand corona and breakdown under high voltage, and chemical resistance under special atmosphere. Corrosion, etc.; the latter includes the requirement to withstand stretching, bending and abrasion during winding and embedding, as well as swelling, erosion, etc. during dipping and drying.Magnet wires can be classified according to their basic composition, conductive core and electrical insulating layer. Generally, it is divided into enameled wire, wrapped wire, enameled wrapped wire and inorganic insulated wire according to the insulating material and manufacturing method used for the electrical insulating layer.The enameled wire is made by coating the conductor with the corresponding paint solution, and then by solvent evaporation and paint film curing and cooling. Enameled wire can be divided into polyester enameled wire, polyesterimide enameled wire, polyamideimide enameled wire, polyimide enameled wire, polyesterimide/polyamideimide enameled wire, corona-resistant enameled wire, and oily enameled wire according to the insulating paint used. Paint, acetal paint, polyurethane enameled wire, etc. Sometimes it is also classified according to the particularity of its use, such as self-adhesive enameled wire, refrigerant resistant enameled wire, etc.The early enameled wire was oily enameled wire, made of tung oil and so on. The paint film has poor wear resistance and cannot be directly used to manufacture motor coils and windings. It needs to be wrapped with cotton yarn when used. Later, the polyvinyl formal enameled wire came out, and its mechanical properties were greatly improved, and it could be directly used in motor windings, and it was called high-strength enameled wire.With the development of weak current technology, self-adhesive enameled wires have appeared, which can obtain coils with better integrity without dipping and baking. However, its mechanical strength is poor, and it can only be used in micro motors and small motors. In addition, in order to avoid the trouble of removing the paint film first during welding, the straight-solderable enameled wire has been developed, and the coating film can fall off by itself in the high-temperature tin enamel bath, making the copper wire easy to weld.Due to the increasingly wide application of enameled wires and the increasingly strict requirements, composite enameled wires have also been developed. The inner and outer paint films are composed of different polymer materials, such as polyesterimide/polyamideimide enameled wires.Wrapped wire An important variety of winding wire. In the early days, cotton yarn and silk, called yarn-covered wire and silk-covered wire, were used in motors and electrical appliances. Due to the large insulation thickness and low heat resistance, most of them have been replaced by enameled wires. Currently only used as high frequency winding wire. In the large and medium-sized winding wires, when the heat resistance level is high and the mechanical strength is high, the glass wire wrapped wire is also used, and the appropriate adhesive paint is used during manufacture.Paper-covered wire still occupies a considerable position in the wrapped wire, mainly used in oil-immersed transformers. The oil-paper insulation formed at this time has excellent dielectric properties, low price and long service life.In recent years, film wrapping wire has developed rapidly, mainly including polyester film and polyimide film wrapping wire.Recently, there is also a mica tape-coated polyesterimide film wrapped copper flat wire for wind power generation.Inorganic insulated wire When the heat resistance level exceeds the limit of organic materials, it is usually coated with inorganic insulating paint. Existing inorganic insulating wires can be further classified into glass film wires, oxide film wires and ceramic wires.There are also combination wires, transposed wires, etc.  

  Hot Tags : Enameled wire magnet wire

  Read More