CITCABLE: PEEK Reinforced Optical Fiber Wire
Temperature Range: -100°C to +260°C
it's meeting the special application requirements of the optical fibre in the radiation environment, the multi-mode fibre with radiation resistance is developed by adjusting the optical fibre components and improving the process technology. This fibre has graded refractive index profile, which fully optimizes the waveguide characteristics of 850nm & 1300nm operating wavelength, and has very low attenuation and high bandwidth. CITCABLE radiation resistant multi-mode fibres have 50μm core, Besides, CITCABLE also can make customized tight-buffered radiation resistant multi-mode fibre
Customer colors are available through minimum order.
Customized: CITCABLE can provide different tight buffered materials, such as ETFE, PFA, PEEK, TPI
PEEK Reinforced Optical Fiber Wire
CITCABLE have optimize 100% PEEK coating process to stabilize PEEK during extreme temperature fluctuations. This stabilization allows the optical fiber to retain PEEK’s strain transfer and optical properties while being free of compression-induced attenuation normally seen during temperature changes. CITCABLE PEEK reinforced optical fiber wire is ruggedized to protect against abrasion and physical trauma to reduce failures and extend the life of the fiber
SINGLE-MODE COATING PEEK
1 Temperature sensors
2.Acoustic sensors
3. Strain sensors
4. Pressure sensors
5.Downhole sensors
6.Embedded sensors
SINGLE-MODE HIGH TEMPERATURE
1. Low loss and bend-insensitive
2.Higher temperature and chemical resistance
MULTIMODE GRADED
1.Temperature Sensors
2 Pipeline monitoring
3.Fire detection systems
